An affordable hifi stereo system for vinyl

I came across a new site lately and contacted the gentleman who owns and operates it and he (Mike) has been gracious enough to allow me to share some of his work with the CVR audience.  Be sure to stop by his site http://hifihipster.com and look around and welcome a new contributor to the CVR Blog!

An affordable hifi stereo system for vinyl

One of the major topics of this blog is affordable audio, so i’ve decided to put together a reasonable priced system for playing vinyl records. These recommendations are just starting points, and I would encourage you to substitute components for any vintage or used stuff you might find. You can always upgrade later, the point now is to start spinning records as soon as possible.

Basically, a hifi stereo setup involves three parts: the source(s), amplifier and speakers. There are a variety of other sources possible (CD/SACD players, iPods, computers, etc) but for now we’ll stick to a turntable. You probably already own a MP3 or CD player anyway.

  Turntable – Pro-ject Debut III

This is the table I currently use, and I highly recommend it. Professional reviewers agree  that it is a perfect entry level turntable for those curious about vinyl. Unlike other, more expensive turntables, it’s pretty much ready to go right out of the box and comes complete with a cartridge (the needle), tonearm, dust cover, felt record mat and attached L+R and grounding cables. The MSRP is currently $349, and there is a $499 version that includes a USB output so you can rip your records to your computer and convert them to MP3. Amazon is currently sold out, but Acoustic Sounds  has it, and they can also be found at Magnolia outlets (which are often located in Best Buy stores).









  Amplifier – Cambridge Audio Topaz AM10

The signal from a turntable must go through a preliminary stage of amplification before it can go to the main amp. This might be accomplished with a “phono stage” like the NAD PP-2 , which I use, but it is an additional expense, takes up more space and uses more resources. The solution is to use an amplifier that has an integrated phono stage, like the Topaz AM10. I haven’t listened to this particular amp, but Stereophile’s Stephen Mejias  recommends this and it is the cheapest one of the four he lists in the linked article. In addition to the phono stage, it’s small, light, looks cool, and has a front input to plug in your iPod. Amazon’s got it for 349 dollars  , and it’s probably your cheapest, easiest bet for beginner hifi amplification.

Speakers -

For beginners, floorstanders might not be the best idea, simply due to their size and expense (although you wouldn’t need to buy speaker stands). Bookshelf speakers are the optimal entry level solution. The problem with speakers is that they are the most subjective in terms of sound quality; what sounds good to me might sound awful to you. This is why it’s kind of difficult to recommend a good speaker without listening first, but sticking with established brands that specialize in making speakers is a good start. This means avoiding crap from Sony or Yamaha, which might be cheap but are of poor quality. Bose speakers have an undeserved reputation for quality thanks to aggressive marketing, but they are the laughing stock of the audiophile world. The Polk Audio TSi200  is available for about $300 a pair, or if you need to go cheaper then the Klipsch B-2 Synergy   is only a bit over $180. Either of these would work fine for a hi-fi-curious individual. A set of speaker stands can be found at most any big box store for 20-30 bucks, or you could DIY up some of your own.

Pricing:

Turntable – $349
Amp – $349
Speakers- $180
Cables and other accessories – $50

Total: +- $928

I hear ya, that’s hardly pocket change. But as I mentioned in the beginning, this is only a suggestion. The best deal and the most important purchase is the Pro-ject turntable, I can’t really think of a better value for the money. The speakers can vary, if you already have a cheapo pair then use them to begin with. The amplifier is optional as well, in fact, if you browse vintage or thrift stores you shouldn’t have a problem finding a decent integrated amp. Most older (pre-1990s) amps that you’ll likely encounter have a phono stage; if it has an input on the back labeled “PHONO” then you’re good to go.

Every system has humble origins, and once you get into vinyl you’ll be hooked.

This article is from http://www.hifihipster.com/, a blog about affordable hi-fi audio for beginners.  Featured articles include equipment  reviews, music reviews, beginner's guides and other essays/opinions about audio.  Reprinted by Permission